They directly affect the service life of the bearings and the transmission efficiency of the fan. Some Roots fans are designed to prevent accidents. When the Roots blower is put into use, within a range of 10 meters in the inlet and outlet directions, the dust, dirt and water on the Roots blower and the gas pipeline must be regularly removed. Structure of Roots blower: ordinary three-leaf Roots blower 2.2kW Parameters: high-pressure three-leaf Roots blower with 2.2kW motor, there is only one model for the Roots blower parameters. At the same time, it reduces the frequent start and stop of the fan unit, reduces equipment wear and tear, and saves equipment maintenance costs.
This is an impossible choice. If we want to make an accurate choice, we need to provide several other parameters, such as pressure parameters and air volume parameters. If other parameters are needed, we need to consider these factors. Generally, the pressure of the compressor is very high. If the pressure of the compressor we use is less than 200KPa, we can use a Roots blower. Generally speaking, due to the different blade structures of three-blade and two-blade impellers, the mechanical performance of the three-blade rotor is superior to that of the two-blade.
The intake muffler of the three-leaf Roots blower not only reduces noise but also plays a good filtering and protective role. Therefore, it is necessary to install the intake muffler. When the Roots blower is running, the oil level in the main oil tank and the auxiliary oil tank must be between the two red lines on the oil level gauge. The continuous pump's air lock should be stopped immediately and the power fan should be stopped appropriately. The parameters of the Roots blower are generally determined in the early stage of engineering design, and the manufacturer of the Turbomolecular blower does not need to worry about the purchasing personnel of the rotary blower for sewage treatment.
