Inaccurate factory pressure calibration of Roots blower equipment results in insufficient pressure. This helps the high pressure Roots Blower achieve high efficiency. Oil level is too high. Select publicity content. The muffler is installed at the outlet and the muffler is installed in the inlet and outlet pipes. The foundation surface should be as flat as possible. The height of the teeth is not less than 0.02M and the height of the teeth is not less than 0.02M. The special shape of the rotor design makes the gap between the rotors appropriate, which greatly improves the sealing performance and further improves the operation efficiency.
The shell of the Roots blower inlet and exhaust shielding line cut into the screw, open in the order of rotation of the top of the rotor. Ensure deep water high pressure ventilation. Under no-load condition, start the power switch to confirm the direction of rotation of the motor. Check whether the instrument is normal or not, if there is any abnormality, notify the maintenance personnel to replace it. The higher the pressure, the more pronounced the problem and the lower the overall efficiency of the high pressure field. This not only reduces the economic cost and construction convenience of fan noise reduction, but also helps to achieve good noise control results.
